The monitor arm recommends 3 options. I will tell you the secret of how to choose, as well as what you find after actual use.

If you use this when you work at home, you look like a "capable" guy.

The location of the monitor is actually very important. Whether it is too high or too low, too close or too far will put a burden on the neck and shoulders. Although there are monitors with stands, the height and position are often difficult to adjust. What is active there is the monitor arm. The monitor is firmly fixed in the best ergonomic position, and the angle and distance can be adjusted flexibly. It's also good to have a comfortable workspace on your desk.

Wirecutter, a review site owned by NewYorkTimes, carefully tested a wide range of monitoring arms ranging from $50 (5700 yen) to $335 (38, 000 yen) and selected the first model recommended.

By comparing and testing 10 rich monitor arms, the first recommended one is identified as the Fully Jarvis monitor arm! Move smoothly to any position and angle and firmly maintain the monitor up to 32 inches high. The installation is simple and the long-term warranty is good.

Best monitor arm: Fully Jarvis monitor arm

The best surveillance arm. Intelligent robust, monitor lifting and rotation is also pull Clark. There is a 15-year long-term guarantee.

The Fully Jarvis monitoring arm supports monitors up to 32 inches and approximately 9 kg, with a wide range of mobility and reliable construction quality. The Monoprice Workstream 15526 is easier to set up, more rugged, and smoother to operate than the cheaper, similar performance. With three color guardrails, the monitor can be supported for many years.

Supported monitor size: 13-32 in.

Corresponding monitor weight: about 1 to 9 kg

Thickness of table and table: about 1 cm~9 cm

Maximum height: about 50 cm from the desktop to the monitor installation center

Maximum extension range (distance reached by the arm): about 60 cm

For large monitors, it is recommended here! Ergotron LX task monitoring arm series

Support for large, heavyweight monitors. The Ergotron LX monitor arm also supports larger and heavier monitors than Fully Jarvis. The corresponding price is also very high.

A monitor arm recommended for people over 180 cm tall. The Thor version of Ergotron LX Paul is more than 5cm long, and people who are more than 180cm tall can also be comfortable to use.

If you have a slightly larger monitor of 34 inches or about 11 kilograms, it is also recommended that the Ergotron LX install the monitor arm. The maximum height is slightly lower than that of the Fully Jarvis, but the range of movement, tilt and rotation functions remain unchanged. Paul, the tall Ergotron LX, is easier to use for people over 180 cm. There are other products with similar features, such as the Amazon basic single-point monitor grandstand, but in the long run, the Ergotron LX with a 10-year long warranty is Otok. The monitoring arm is a product that can be used for as long as possible, and you can rest assured if you have a long-term guarantee.

Supported monitor size: up to 34 inches

Corresponding monitor weight: about 3 kg~11 kg

Thickness of table and table: about 1 cm~6 cm

Maximum height (LX): about 39cm from the desktop to the monitor installation center

Maximum height (LX Tolpole): about 65 cm from the desktop to the monitor installation center

Maximum extension range (LX, Tolpole): about 65 cm

Someone who wants to recommend the monitor arm.

If the computer work lasts for a long time, the neck and shoulder are prone to pain, but it will be much easier to put the monitor in the "right place" in accordance with ergonomics. So what is the appropriate position? that is "no hunchback position".

"regardless of the type of screen, we need to make sure that the top of the screen matches the height of the eye," said Lisa Zahari, an ergonomics expert. (when using progressive refractive lenses, it is best to lower the height of the monitor.) "when the user sees the monitor, the head should be in a neutral (neutral) position," Zaharie said.

By the way, it was previously recommended that "line of sight under the monitor frame, 5 cm~7 cm", but now the frame of the monitor is narrowed, so it is a little different.

The monitor arm is used for items that set the external monitor at the appropriate height. Having said that, there are also many monitors with adjustment brackets, and there are also many people who "don't need a monitor arm." Indeed, even if the attached bracket is not high enough, the shelf and special bracket (cheaper than the arm and easy to set up) are needless to say. In the extreme, it is enough to pile books on the stage.

However, this method does cause interference on the desk, and it is hard to change the position of the monitor. It's more convenient to have a monitor arm if you want to fully fit your physique and work position.

In addition, when working with people with poor height, you can easily adjust the monitor if you have an arm, which is also useful when you want others to see the picture. It is also recommended for people with upright desks, whether sitting or standing, want to easily set up monitors. Note, however, that it is not possible to use a monitor arm instead of a standing platform with an ordinary table.

Don't forget the size check before purchase. Please carefully measure the correct size and required height before actually purchasing the monitor arm. Seat height and height vary from person to person, the display also has a variety of sizes and weights, it is recommended to use the following methods to investigate.

1. お使いのモニターの型を調べて重量を確認し、モニターアーム取りつけに使用するVESAマウントに対応するかチェック。Ergotronにはモニター検索ツールもあります。
2. 机から目線の高さまでの距離を測定（おおよそでOK）。座位と立位の両方で使用する場合は、それぞれ行なう。
3. 腕を伸ばした位置までモニターを遠ざけ、目からモニターまでの距離を測定。これがモニターアームに必要な｢伸長範囲｣に。
4. デスクトップの厚さを測定。
5. 1～4の情報を参考にモニターアームのスペックと比較し、自分に合っているかどうかを確認。製品を決定する。

The selection method of monitor arm

There are also a variety of monitoring arms sold on the Internet, and Wirecutter staff introduce you to the criteria for selecting recommended products.

Best monitor arm: Fully Jarvis monitor arm

If you want a monitoring arm that is attractive and easy to set up and adjust, the Fully Jarvis monitoring arm is recommended. Among the products tested, the arm has the widest range of movement and the body is sturdy, which can well support monitors of general size and weight. Smooth arms, Kabari can also choose from white, black, silver, but also proud of the stylish appearance.

Jarvis supports almost all VESA compatible monitors. Official support for up to 9 kg, 32-inch display. There are also models that can maintain about 11 kg monitors (such as Ergotron LX), but ordinary monitors are sufficient. By the way, the 27-inch test monitor used by Wirecutter is 4.5kg, and the 34-inch ultra-wide display is also 6.8kg. However, according to the company's customer support, if the screen is bent or tilted forward, the durable weight will drop. If you have any questions, it is recommended that you consult Fully's support team before purchasing.

Compared with the Monoprice Workstream 15526 of almost the same design, the Jarvis is also very smooth. You can get it up and down with little effort. The vertical direction of the movable domain is about 33 cm, about 60 cm, and about 60 cm, which is sufficient for general word processing. You can also tilt 90 degrees or rotate 180 degrees, or rotate 360 degrees on the base.

By the way, installing the arm requires about 2.5 cm of space on the back of the desk, and in the most compact state, the monitor protrudes forward by about 12.5 cm, so measure the workspace before buying the monitor arm.

Like a normal monitor arm, Jarvis also uses the accompanying hexagonal wrench to adjust the tension of the arm, but the response is very good and can be easily adjusted, which is where I am very happy. It has a slot for hexagonal wrenches, which is hard to find on other arms. Even if the position needs to be fine-tuned in the future, it can be corrected immediately.

One thing that makes people care

Fully Jarvis is a little more complex to set up than Ergotron LX (but still a little better than the previous version). Because you have to install your arm on your desk before installing the monitor, it can be hard for a person to do it. It is difficult to tighten the joint of the arm without using boxes and books to secure the monitor, preferably for more than two people if possible.

Although it is more stable than other cheap models, if you put a large monitor and stretch your arms hard, you will feel dizzy anyway. In addition, when the monitor is rotated 360 degrees, the base and fasteners are about to fall off from the desk (about 2.5 cm in thickness), so pay attention to it. When tilting the angle of the monitor up and down (unlike when lifting), you need to use a hexagonal wrench to adjust.

It can be said that all the models, cable management is not satisfactory. Fully's arm has plastic parts that summarize the cable, which feels a little cheap. Although it is a slightly difficult design to adjust, it is rarely used, so there is no big problem.

For large monitors, it is recommended here! Ergotron LX task monitoring arm series

For people with larger or heavier monitors than Jarvis compatibility, it is also recommended that Ergotron LX install the monitor arm. In addition, if you are more than 180 cm tall, also consider the arm height of the Ergotron LX task monitor. The height of this monitor can be more than 13 centimeters higher than that of Jarvis and standard LX. Both the Ergotron LX and LX tall poles provide the same functionality as the Jarvis, while supporting monitors up to about 34 inches, about 9 kg (and 32 inches for Jarvis, about 11 kg). In addition, the arm extension of the LX series is about 5 cm longer than that of the Jarvis, even for desks with a depth of more than 76 cm. It can also be adjusted to a position lower than the top of the desk or table. LX is simpler than Jarvis, but the long-term warranty is 10 years.

Comparing Ergotron LX with Fully Jarvis, there is not much difference in the smoothness, movable range, robustness and other functions of the movement. Wirecutter Advanced Stacker Kingbar Streams has been fond of Ergotron LX since 2017. The size of the monitor is 27 inches. "it's easy to sit up, and it's more comfortable around the desk than when you pile up books instead of the stands," he said. " When doing other work, moving the monitor to the other side of the table is very convenient to create space.

With LX, you can move the monitor vertically from the table about 39 cm (to the VESA installation center), left and right by 63.5 cm, and back and forth by about 65 cm. By the way, LX tall Paul has a maximum height of about 65 cm, the tallest product ever tested. It is most suitable for people whose height is more than 180 cm.

Since 2014, Nathan Edwards (Nathan Edwards), a Wirecutter worker who uses Ergotron LX tall Paul on a 27-inch monitor, said: "it's very rare to be higher [than the standard]." Paul has become so tall that he can sit and stand up and work. Because I did a good job, I didn't mind shaking when I was 195 cm tall when I was standing.

I repeat, it is recommended that you carefully measure your workspace before purchasing and select the monitoring arm that is suitable for you.

Other excellent monitoring arms

"if it can be adjusted smoothly, the money won't have a clue! "in this case, it is also possible to try the Ergotron Trace monitor installation. Although it is nearly 3 times the price of the recommended project, it can be moved vertically and horizontally more easily than other products. When the screen is shared with people in the same room, the display moves up and down and moves left and right smoothly. The column is too thick and less glossy. However, the price is high, take up space on the desk, there is cable storage space in front of the arm, the design is not satisfactory, this is a negative point.

©2021 WIRECUTTER,INC. A NEW YORK TIMES COMPANY.