Finally Wi-Fi 6 (IEEE 802.11AX) Compatible devices are also penetrating, and many users are thinking about buying a new router soon.Under such circumstances, TP-Link released a high-cost Wi-Fi 6 compatible router "Archer AX72".
5GHz and 2.It is a 4GHz dual band router and supports IPv6 IPOE and TP-Link ONEMESH.The transmission speed is 4804Mbps (5GHz band)+ 574Mbps (2).Despite the powerful specifications with 4GHz band, the actual selling price on Amazon is 12,566 yen, which is quite reasonable.
In addition, it is also the target of the Wi-Fi router coupon sale, which will be held throughout Amazon from December 10, 2021 to January 31, 2022, and is perfect for introducing this opportunity.This time, I was able to borrow the Wi-Fi 6 compatible relay device "RE600X", so I verified my ability.
Wi-Fi 6 compatible router "Archer AX72" released by TP-Link.The appearance design with six antennas is quite distinctive
The exterior is asymmetric left and right, and it has a pretty novel design as a router.There are six high -end classan antennas, and a ventilation hole for heat exhaust heat is applied to the top of the body.Four antennas are for 5GHz bands, 2 are 2.For 4GHz band, the angle can be changed freely.The size is 272.5 (W) x 147.2 (D) x 49.2 (H) mm, basically flat, but it can be installed on the wall because it has a hook for wall hanging on the bottom.
The ventilation hole on the top has improved breathability and enhances the exhaust heat effect.
On the back is Gigabit's WAN port and four LAN ports, not only WPS buttons, but also Wi-Fi and LED on/off.It is convenient to be physically set without standing up/off the management screen.Also, on the right is USB 3.It is also equipped with 0 ports, and can be used as a file server by connecting storage such as HDD.
Ports and various switches are placed on the back.The power supply connects the AC adapter
USB 3 to the right.0 ports are prepared and can be used as a simple file server by connecting storage
The LED lamp is located in front.LED on/off can be set with the back switch
The function is substantial in the first half of the 10,000 yen range, and it supports the "IPv6 IPOE" method, which has recently been adopted by providers using optical communication networks such as FLET'S Hikari Next.
In the conventional PPPoE method, the congestion of the line due to overhead and traffic may decrease.However, if you connect with a new IPOE system using IPv6, it is unlikely that such a thing will occur and you can secure a stable speed.
Although users will use the IPv6 communication network, the IPv4 Over IPv6 can also use conventional IPv4 communication, so that it will not be possible to connect to websites and web services that only support IPv4.Absent.However, the provider needs to use IPv4 Over IPv6.It is compatible with the method mainly used by Japanese providers, such as DS-Lite, V6 Plus, and OCN Virtual Connect, so check if it can be used.
As for Wi-Fi performance, we support technology for stably connecting multiple devices, such as 4x4 MU-MIMO and OFDMA.The simultaneous connection number is 80 units.It also supports the doubled bandwidth with HE160 and the 1024-QAM, 6 streams, which has improved Wi-Fi 5 to 25 % throughput, and can be viewed comfortably even in videos with a lot of communication such as 4K and VR.Is possible.
It also supports beam forming that enhances the directivity of radio waves toward the device.As a result, comfortable communication is possible in a wide range.
Built-in antenna type Wi-Fi 6 compatible relay device "RE600X"
Even Archer AX72 alone can communicate in a very wide area, so if it is about 100 square meters on a floor, such as an apartment, it seems that it can be covered enough.However, in the case of multiple floors in detached houses, it is even more comfortable to convert to high-speed communication in a wider range.
The Archer AX72 supports the TP-Link mesh Wi-Fi function "TP-Link ONEMESH".By connecting compatible devices, the communication range can be easily expanded.The Wi-Fi 6 compatible relay device "RE600X" released on November 11 is also one of the ONEMESH compatible products.
It is an outlet-type relayer and has a gigabit port, so it can be connected to devices that do not support Wi-Fi.In addition, the bridge mode can be used, so it can be used as a Wi-Fi access point, not as a relay device.It also supports technologies that communicate at higher speed, such as 2x2 MIMO and beamforming.
The size is 78 (W) x 36 (D) x 149 (H) mm.The center of gravity is also stable, and it does not turn forward due to its own weight
There is a gigabit port on the right side, which can be connected to devices that do not support Wi-Fi, and can be used as an access point.
With a built -in antenna type, a square design that fits the interior.Even if the two outlets are inserted, the lower outlet can be used without blocking.The actual selling price on Amazon is 7190 yen, which is also excellent in cospa, so it is good to introduce one or two cars according to the size of your home.
Navigation Lists
6 antennas composed of high -end classes Compatible with IPv6 IPOE, such as DS-Lite, V6 Plus, and OCN Virtual Connect Mesh Wi-Fi is also converted to a representative compatible with TP-Link OneemeshCategory
Related Articles
Hot Articles