At last, I tried a small table that can be attached to the top of the display, which has begun to appear in 100-yen stores.

When the mainstream of PC displays used to be CRTs instead of LCDs, it was easy to put documents on the display. The CRT display has plenty of depth, which is the flip side of having enough space to put things.

Even if time goes by and the mainstream of the display becomes liquid crystal, this "on the display" seems to be a place where PC users want to put something, and simple tables for putting small items are on sale from each company. The number of products has increased to the present, probably because it is easy to install and has the advantage of being easily accessible.

And recently, it's surprising that these small tables are also available at 100-yen stores. This time, I bought Yamada Kagaku's "accessory table for monitors" sold by 100-yen companies and tried it.

The actual selling price is 110 yen. I got it from Can Do, but the material that has been reported to have been seen in Daiso and Ceria is polycarbonate, and the main body size is 112 x 90 x 21 mm. The load capacity is 200g when viewed from the side. The arm is folded and the arm is unfolded. It can be rotated about 270 degrees by loosening the screws. When mounting, it is better to first attach the arm at an appropriate angle. Attach it by hooking it on the top of the display. Attach the arm with the left and right angle adjustment screws so that the top plate is parallel. Completed to fix. A side view that can handle even the slightest irregularities on the back of the display.The depth is about 88mm, which is quite compact.

The structure of such a small table is very simple. Simply hook the front of the top plate to the edge of the display, then place the arm on the back to the back of the display so that the top plate is horizontal and adjust the angle. It's not pasted or screwed, it's just placed, so it's easy to remove and shift the position to the left or right.

To put it the other way around, it is vulnerable to vibration and may fall off with a light impact, but it is good to be able to freely adjust the left and right positions even after mounting. The position on the display depends on what you put it on, and it often changes. Once the location is decided, it can be fixed with adhesive tape as needed.

The area of ​​the small table of Yamada Kagaku this time is 88 x 88 mm, which is not so large. If you put a pen stand, it will be full, and even if you make a figure stand, one body is the limit. It's by far the most compact of this kind of accessory table.

However, in the case of this product, it is cheap at 110 yen, so if you procure multiple items and arrange them side by side, you can easily expand the installation space. Of course, it is not possible to extend the depth only in the left-right direction, but it makes sense if you think that it is a product that is supposed to be used more than once from the beginning. In that sense, there is no doubt that the price is easy.

Ideal for installing small smart speakers. However, the standard load capacity of 200g is not enough, which is convenient as a place to install figures that you want to be careful about. In this case, the load capacity does not matter so much. Of course, you can put small items, but be careful that you can not see it from the front of the display because it is not high. The 27-inch display looks good, as seen from the back, where about 5 are lined up side by side.Due to the left and right screws, it is not possible to put them together and line them up.

By the way, I have tried some simple tables for such displays in the past, but there are some points to choose.

One is that the two rear arms to keep the main unit horizontal can move independently on the left and right. The back of a commercial display is not always flat and may be bulging or stepped. Products that can change the angle of the arm only on the left and right at once cannot respond to such changes in unevenness and tend to be unstable.

This product adopts a mechanism in which two arms meet in the middle and support at one point, and although it is not a perfect score, in the sense that it is easy to respond to changes in unevenness, the minimum level has been cleared. There is. It's a bit annoying to have to tighten the screws on both sides even though it's actually one arm, but it's acceptable.

Originally, it is easier to use if the left and right arms are independent. This product has a structure in which two arms merge into one. In a general product (left), the left and right arms are independent, and it is finely adjusted according to the unevenness. In many cases it can be adjusted

Second, the part that hits the claws on the edge of the display is not very deep. Recent displays are becoming narrower, and if the hooked part is too deep, it may hide the edge of the screen. Of course, it's too shallow and easy to come off, but I don't want it to hit the screen. This product has a claw depth of 7 mm, which is a good point.

If the part of the claw that catches on the display is deep, it may hide the screen This time it is barely safe, but if the display is a type that sells a narrow frame, the screen may be hidden This product (right) has a slippery top plate So, it is a minus that it is not anti-slip processed like other companies' products (left)

As mentioned above, despite the small size and instability caused by the structure in the first place, it is not bad as an item that can be bought at 100-yen, which is the evaluation that I actually used. The molding is also solid, and it does not look cheap, and it is integrated with the display so that it does not feel disproportionate.

Anyway, the top of the display is the few dead spaces left around the desk that can be used freely, so this product is worth using. For those who haven't tried this kind of item, it may be the right time to get it easily at 100-yen.

In addition to the black I tried this time, there is also a clear type.Dust may be less noticeable here