If you want to strengthen the radio wave of wireless LAN, you should not do this alone 6 selections of NG collection

If you have a wireless LAN router, you will be able to use the Internet quickly-even if you think so and introduce a wireless LAN router, some people may actually feel that it is "not so comfortable" or "slow". not. One of the solutions to the problems related to wireless LAN radio waves is the "installation location".

Small Business Trends will refer to the article "Are These Mistakes Worsening Your WiFi Using Experience?"

(1) On the floor

If you have a wireless LAN router on the floor, it's easy to think that the signal is weak. Wireless LAN signals have the characteristic of flying downward and laterally. When placed on the floor, it is difficult for the signal to spread throughout the room. The article advises that the wireless LAN router should be placed in a high place, "at least 1.5 to 2 meters above the ground".

Considering this, if you install a wireless LAN router on the first floor of a two-story house and use it mainly on the second floor, it is natural that the signal is weak. You may consider introducing a wireless LAN repeater.

(2) Near the aquarium

It is also not good to put the wireless LAN router on the same table as the aquarium. Wireless LAN signals are weakened when affected by water reflections. It doesn't matter if it's a tropical fish or a goldfish. It is not only the aquarium that blocks radio waves. It seems better to avoid placing a wireless LAN router near a vase containing water.

(3) By the window

It is not good to put the wireless LAN router near the window. There is also a security problem that the wireless LAN router can be seen from the outside, but let's look at it from the point of view of signals. According to the article, half of the signals are flying outwards when placed by the window. In other words, half of the precious radio waves are wasted. This is a great loss. If you have a wireless LAN router near the window and you think the signal is weak, stop right now.

(4) Next to electronic devices

There will be various electronic devices in the room, both at home and in the office. And I think the number is increasing little by little. These electronic devices can also be an enemy to the signals of wireless LAN routers. In fact, it often causes interference, and it's best not to place it near TVs, microwave ovens, cordless phones, etc. In addition, be careful of Bluetooth-enabled devices. Secure a place to install the wireless LAN router away from these electronic devices.

(5) The corner of the room

As mentioned earlier, wireless LAN signals fly 360 degrees in all directions. Therefore, it is not efficient to put it in the corner of the room. In particular, avoid corners sandwiched between concrete walls that are difficult for radio waves to pass through. In terms of signal, wooden seems to pass better than concrete.

(6) Hide

At this point, the choices are getting smaller and smaller? The last piece of advice is that if you put it in a place where the wireless LAN router can be hidden, the signal will be weaker. The reason is that things around me block the radio waves. As mentioned above, it is not good to hide with concrete walls or electronic devices.

In this way, in order for the wireless LAN router to send radio waves firmly, it is desirable to place it in a high place in the center of the house without hiding it, without any obstacles such as electronic devices around it. However, the reality is that this is not the case, including the connection with a wired connection. Let's start with some advice, put it in a place where it can be installed, and see how the signal has changed. Why not try some and find the "best compromise"?